Controls Engineer - BESS Commissioning
SKILLS
FULL DESCRIPTION
Controls Engineer - BESS Commissioning
[Employer hidden — sign up to reveal] is seeking an experienced Controls Engineer for a contract role at a large-scale Battery Energy Storage System (BESS) project in Leeds, UK. The role involves commissioning and troubleshooting control systems including PLC, SCADA, EMS, BMS, and PCS.
- Salary: £600 - £650 per day (Inside IR35)
- Location: Leeds, West Yorkshire
- Job Type: Contract / Freelance
- Start: ASAP / Immediate
Role Overview
We are seeking an experienced Controls Engineer to support the commissioning, testing and integration of a large-scale Battery Energy Storage System (BESS) project.
The successful candidate will be responsible for commissioning and troubleshooting the control systems associated with the BESS, including PLC/RTU systems, SCADA, EMS/PMS, BMS interfaces, PCS/inverters and plant-level controls.
Key Responsibilities
- Lead and support controls commissioning activities for the BESS project from pre-commissioning through to energisation, functional testing and handover.
- Commission and troubleshoot PLC, RTU, SCADA, EMS/PMS and plant control systems.
- Configure and test control logic, sequences, interlocks, permissives, alarms and trips.
- Verify communications and data exchange between BESS PLC/RTU, SCADA, EMS, PMS, BMS, PCS, inverters, HV/LV equipment, protection and metering systems.
- Carry out I/O checks, loop checks and point-to-point testing.
- Support FAT/SAT activities and review test documentation.
- Perform functional testing of BESS operating modes including charging, discharging, standby, grid support and emergency shutdown.
- Test and validate remote/local control functionality.
- Support testing of active power, reactive power, voltage and frequency control functions.
- Verify grid-code related control functions.
- Investigate and resolve PLC, RTU, SCADA and communications faults during commissioning.
- Test and validate alarms, events, status indications and control commands within SCADA.
- Support Modbus TCP/IP, IEC 61850, IEC 60870-5-104, OPC UA/DA or other industrial communications.
- Review PLC/RTU logic, control narratives, functional design specifications and cause-and-effect documentation.
- Assist with integration between BESS and DNO/TSO/utility control systems.
- Support testing of emergency stop, safety interlocks and shutdown sequences.
- Work with OEMs and subcontractors to diagnose and resolve issues.
- Record test results, punch-list items, defects and corrective actions.
- Produce and review commissioning documentation and handover documentation.
- Support final performance testing and successful handover to operations.
Technical Experience Required
- BESS control systems
- PLCs and RTUs
- SCADA systems
- EMS / PMS
- BMS and PCS interfaces
- Battery energy storage systems
- Power conversion systems / inverters
- HV/LV electrical systems
- Industrial communications (Modbus TCP/IP, IEC 61850, IEC 60870-5-104, OPC UA/DA, Ethernet/IP, Profinet, TCP/IP)
- PLC programming and fault finding
- HMI/SCADA configuration
- Alarm and event management
- Control panels and instrumentation
- Electrical protection interfaces
- Metering systems
- Grid connection/control systems
Commissioning Experience
- Pre-commissioning inspections
- I/O and point-to-point testing
- Loop checks
- Cold commissioning
- Hot commissioning
- Energisation support
- Functional testing
- SAT
- Integrated systems testing
- Troubleshooting
- Control system modifications
- Site acceptance testing
- Performance testing
- Defect/punch-list management
- System handover
BESS-Specific Testing
- BMS → PCS → PLC/RTU → EMS/PMS → SCADA → Grid/DNO
- State of Charge (SoC), State of Health (SoH)
- Charge/discharge commands, active/reactive power setpoints
- Voltage control, frequency control, ramp rates
- Import/export limits, battery limits
- PCS operating modes, grid connection status
- Fault conditions, emergency shutdown, interlocks and permissives
- Alarm and trip functionality, remote control commands
- Communications failure behaviour, loss-of-grid conditions
Qualifications & Certifications
- Degree/HNC/HND in Electrical Engineering, Control Systems, Automation or related
- Demonstrable commissioning experience in industrial or energy environment
- Strong understanding of electrical and control systems
- CSCS/ECS or equivalent site certification desirable
- 18th Edition desirable
- Experience working under RAMS, permit-to-work and site commissioning procedures
[Employer hidden — sign up to reveal] are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.