Controls Engineer - BESS Commissioning
SKILLS
FULL DESCRIPTION
Controls Engineer - BESS Commissioning
Location: Leeds, West Yorkshire | Job Type: Contract | Salary: £600 - £650 per day + Inside IR35 | Reference: BBBH36383_1791302584
[Employer hidden — sign up to reveal] is seeking an experienced Controls Engineer to support commissioning, testing and integration of a large-scale Battery Energy Storage System (BESS) project.
Role Overview
We are seeking an experienced Controls Engineer to support the commissioning, testing and integration of a large-scale Battery Energy Storage System (BESS) project. The successful candidate will be responsible for commissioning and troubleshooting the control systems associated with the BESS, including PLC/RTU systems, SCADA, EMS/PMS, BMS interfaces, PCS/inverters and plant-level controls. The role will involve working closely with the commissioning, electrical, SCADA, protection and OEM teams to ensure the complete BESS control architecture is correctly configured, integrated, tested and handed over to the client.
Key Responsibilities
- Lead and support controls commissioning activities for the BESS project from pre-commissioning through to energisation, functional testing and handover.
- Commission and troubleshoot PLC, RTU, SCADA, EMS/PMS and plant control systems.
- Configure and test control logic, sequences, interlocks, permissives, alarms and trips.
- Verify communications and data exchange between BESS PLC/RTU, SCADA, EMS, PMS, BMS, PCS, inverters, HV/LV equipment, protection and metering systems.
- Carry out I/O checks, loop checks and point-to-point testing.
- Support FAT/SAT activities and review test documentation.
- Perform functional testing of BESS operating modes including charging, discharging, standby, grid support and emergency shutdown.
- Test and validate remote/local control functionality and grid-code related control functions.
- Investigate and resolve PLC, RTU, SCADA and communications faults during commissioning.
- Support Modbus TCP/IP, IEC 61850, IEC 60870-5-104, OPC UA/DA or other industrial communications as required.
- Review PLC/RTU logic, control narratives, functional design specifications and cause-and-effect documentation.
- Assist with integration between the BESS and DNO/TSO/utility control systems.
- Support testing of emergency stop, safety interlocks and shutdown sequences.
- Record test results, punch-list items, defects and corrective actions and produce handover documentation.
Technical Experience Required
The ideal candidate will have strong experience in industrial controls commissioning, preferably within the energy, power generation, renewable energy or BESS sectors. Experience with some or all of the following is desirable:
- BESS control systems, PLCs, RTUs, SCADA, EMS/PMS, BMS and PCS interfaces
- Battery energy storage systems, power conversion systems/inverters, HV/LV electrical systems
- Industrial communications: Modbus TCP/IP, IEC 61850, IEC 60870-5-104, OPC UA/DA, Ethernet/IP, Profinet, TCP/IP networking
- Remote Terminal Units (RTUs), PLC programming and fault finding, HMI/SCADA configuration
- Alarm and event management, control panels and instrumentation, electrical protection interfaces, metering systems, grid connection/control systems
Commissioning Experience
Candidates should have demonstrable experience with pre-commissioning inspections, I/O and point-to-point testing, loop checks, cold/hot commissioning, energisation support, functional testing, SAT, integrated systems testing, troubleshooting, control system modifications, site acceptance testing, performance testing, defect/punch-list management and system handover.
BESS-Specific Testing
Particular emphasis will be placed on experience testing the interaction between the various BESS control layers (BMS → PCS → PLC/RTU → EMS/PMS → SCADA → Grid/DNO) including State of Charge, State of Health, charge/discharge commands, active/reactive power setpoints, voltage/frequency control, ramp rates, import/export limits, battery limits, PCS operating modes, grid connection status, fault conditions, emergency shutdown, interlocks, alarms, remote control commands, communications failure behaviour and loss-of-grid conditions.
Qualifications & Certifications
- Degree/HNC/HND or equivalent in Electrical Engineering, Control Systems, Automation or related discipline
- Demonstrable commissioning experience in industrial or energy environment
- Strong understanding of electrical and control systems
- Relevant electrical/control systems safety qualifications
- CSCS/ECS or equivalent site certification desirable
- 18th Edition desirable depending on project requirements
- Experience working under RAMS, permit-to-work and site commissioning procedures
[Employer hidden — sign up to reveal] are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.