Controls Engineer - BESS Commissioning

🔒 Confidential Employer
Posted 10 October 2026
LOCATION
Leeds
TYPE
Contract
LEVEL
Mid-Senior level
CATEGORY
Engineering
This employer holds a UK Home Office sponsor license — sponsorship for this specific role is at the employer’s discretion

SKILLS

PLC/RTU systems SCADA EMS/PMS BMS interfaces PCS/inverters Modbus TCP/IP IEC 61850 Battery Energy Storage Systems (BESS)

FULL DESCRIPTION

Controls Engineer - BESS Commissioning

[Employer hidden — sign up to reveal] is seeking an experienced Controls Engineer to support the commissioning, testing and integration of a large-scale Battery Energy Storage System (BESS) project. This is a contract position based on-site in the UK with immediate start.

  • Location: Leeds, West Yorkshire
  • Job Type: Contract
  • Salary: £600 - £650 per day + Inside IR35
  • Reference Code: BBBH36383_1791302584

Role Overview

The successful candidate will be responsible for commissioning and troubleshooting the control systems associated with the BESS, including PLC/RTU systems, SCADA, EMS/PMS, BMS interfaces, PCS/inverters and plant-level controls. The role will involve working closely with the commissioning, electrical, SCADA, protection and OEM teams.

Key Responsibilities

  • Lead and support controls commissioning activities for the BESS project
  • Commission and troubleshoot PLC, RTU, SCADA, EMS/PMS and plant control systems
  • Configure and test control logic, sequences, interlocks, permissives, alarms and trips
  • Verify communications and data exchange between BESS PLC/RTU, SCADA, EMS, PMS, BMS, PCS, inverters, HV/LV equipment, protection and metering systems
  • Carry out I/O checks, loop checks and point-to-point testing
  • Support FAT/SAT activities and review test documentation
  • Perform functional testing of BESS operating modes including charging, discharging, standby, grid support and emergency shutdown
  • Test and validate remote/local control functionality
  • Support testing of active power, reactive power, voltage and frequency control functions
  • Verify grid-code related control functions
  • Investigate and resolve PLC, RTU, SCADA and communications faults
  • Support Modbus TCP/IP, IEC 61850, IEC 60870-5-104, OPC UA/DA or other industrial communications
  • Assist with integration between BESS and DNO/TSO/utility control systems
  • Support final performance testing and handover to operations

Technical Experience Required

The ideal candidate will have strong experience in industrial controls commissioning, preferably within energy, power generation, renewable energy or BESS sectors. Experience with some or all of the following is desirable:

  • BESS control systems
  • PLCs and RTUs
  • SCADA systems
  • EMS / PMS
  • BMS and PCS interfaces
  • Battery energy storage systems
  • Power conversion systems / inverters
  • HV/LV electrical systems
  • Industrial communications (Modbus TCP/IP, IEC 61850, IEC 60870-5-104, OPC UA/DA, Ethernet/IP, Profinet)
  • PLC programming and fault finding
  • HMI/SCADA configuration
  • Alarm and event management
  • Control panels and instrumentation
  • Grid connection/control systems

Commissioning Experience

Candidates should have demonstrable experience with pre-commissioning inspections, I/O and point-to-point testing, loop checks, cold and hot commissioning, energisation support, functional testing, SAT, integrated systems testing, troubleshooting, control system modifications, site acceptance testing, performance testing, defect/punch-list management and system handover.

BESS-Specific Testing

Particular emphasis will be placed on experience testing the interaction between BMS, PCS, PLC/RTU, EMS/PMS, SCADA and Grid/DNO, including verification of State of Charge (SoC), State of Health (SoH), charge/discharge commands, active/reactive power setpoints, voltage and frequency control, ramp rates, import/export limits, battery limits, PCS operating modes, grid connection status, fault conditions, emergency shutdown, interlocks and permissives, alarm and trip functionality, remote control commands, communications failure behaviour and loss-of-grid conditions.

Qualifications & Certifications

  • Degree/HNC/HND in Electrical Engineering, Control Systems, Automation or related
  • Demonstrable commissioning experience
  • Strong understanding of electrical and control systems
  • CSCS/ECS or equivalent site certification desirable
  • 18th Edition desirable
  • Experience working under RAMS, permit-to-work and site commissioning procedures

Desirable Sector Experience

Battery Energy Storage Systems, Solar PV, Wind, Substations, Grid connections, Power generation, HV infrastructure, Renewable energy, Data centres, Industrial automation, Power plants, Utilities.

[Employer hidden — sign up to reveal] are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants.

Sign up free — access 45,000+ UK sponsor-licensed jobs